The high-solids formula of Interprotect HS results in fewer coats required to reach the desired film thickness.
Featuring a high-solids formula that is low-in-VOCs, InterProtect® HS is a two-part epoxy that can be used above or below the waterline as a high-build primer. The high-solids formulation results in fewer coats required to reach the desired film thickness. As part of a gelcoat blister repair or prevention system, the formula incorporates Micro-Plate® Technology to reduce water migration through the epoxy to the hull surface which could lead to blistering. Micro-Plates® also provide corrosion protection for metals. Kit makes one gallon.
Key Features
- Creates a barrier against water intrusion
- Protects against corrosion
- Meets the most restrictive VOC regulations
- Can be used as part of gelcoat blister repair prevention system
Physical Data
- Type: Barrier Coat Primer
- Finish: Satin
- Available Colors: Grey
- Components: 2
- Solids by Volume: 66%
- Coverage: 151sq.ft/gal.(Below waterline)
- Coverage: 211sq.ft/gal (Above waterline)
- VOC: 289 g/l
Application
- Application Method: Brush, roller, airless or conventional spray
- Total Thickness Required: Varies with application
- Dry Film Thickness: 7 mils
- Wet Film Thickness: 10 mils
- Thinner: Brush: Y2333N (Model 198606); Spray: Y2316N (Model 198598)
Drying Times* (Hours)
| Drying | @41°F | @59°F | @77°F | @95°F |
| To touch | 7 hr. | 4 hr. | 3 hr. | 1.75 hr. |
| To recoat | 7 hr. | 5 hr. | 3 hr. | 2 hr. |
| To launch | 16 hr. | 8 hr. | 6 hr. | 3 hr. |
More information
For detailed application instructions see the NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.
