Awlgrip D7222Q Global Awlfair LW Fast Cure Converter Red Quart

For Professional Use Only. The Awlgrip Global Awlfair LW Fast Cure Converter (D7222Q) is the Part B red converter component of the two-part Awlfair LW Fast epoxy trowelable fairing system. When combined with the white D8200 base, it forms a premium lightweight fairing compound engineered to fair, level, and smooth surface imperfections including gouges, pitting, dents, and weld seams. Suitable for use both above and below the waterline, this system is trusted by professional marine applicators worldwide.

Key Features:

• Fast Cure Formula: Sandable in as little as 90 minutes at 95°F/35°C, 6 hours at 77°F/25°C, and 17 hours at 55°F/13°C
• Touch Cure: Resistant to foot traffic in approximately 7 hours at 75°F/25°C; full cure achieved in 7 days
• Super Smooth Finish: Delivers easy sanding and a smooth, uniform surface profile that reduces drag and improves appearance
• Simple 1:1 Mix Ratio by Volume: Mix D8200 base with D7222 converter at a 1:1 ratio by volume (1.56:1 by weight); no induction time required
• Easy Color Confirmation: Mixed compound turns a uniform pink color, making it easy to verify a thorough blend with no streaks or lumps
• Manual and Automatic Mixing Compatible: Suitable for both hand-mixing and automated dispensing equipment
• Above and Below Waterline Use: Formulated for use in demanding marine environments at and below the waterline
• High Hardness Development: Achieves Shore D hardness of greater than 60 after 7 days at 77°F/25°C

Application Notes:

• Apply using trowels, spatulas, longboard, or putty knives in thin layers to avoid air pockets
• Apply only over properly prepared and primed Awlgrip substrates; Hullgard Extra and High Build epoxy primers are recommended
• Must be sanded before recoating with itself or another Awlgrip product
• Must be overcoated with an epoxy primer (High Build, Hullgard, UltraBuild) before applying a topcoat system to reduce risk of print-through
• Do not add thinners or reducers to the mixed compound; clean equipment with T0006 or T0002 reducer, or MEK
• Do not apply when surface temperature is less than 3°C/5°F above the dew point, or above 41°C/105°F
• Maximum application thickness: 400 mils (1 cm) per coat

VOC Content: Fast Converter (D7222) — 185 g/L (1.54 lbs/gallon). Mixed system (1:1 by volume) — 93 g/L (0.77 lbs/gallon).

This quart-size listing is for the D7222 Fast Converter (Part B) only. The D8200 white base (Part A) is sold separately. This product is designated as hazardous material for shipping purposes.