Awlgrip D8200Q Global Awlfair LW Epoxy Trowelable Fairing Compound Base White Quart

For Professional Use Only. Awlgrip Global Awlfair LW (D8200Q) is a premium two-component epoxy trowelable fairing compound engineered for fairing, leveling, and smoothing surface imperfections including gouges, pitting, dents, and weld seams. Suitable for use both above and below the waterline, it is a trusted choice for professional marine finishing applications.

This listing is for the Base Component Only (Part A — White, Quart). A compatible Awlfair LW Converter (D7200 standard cure or D7222 fast cure) must be purchased separately. The base and converter are mixed at a 1:1 ratio by volume.

Key Features:

• Premium epoxy trowelable fairing compound for high-end marine surface preparation
• Repairs gouges, pitting, dents, and weld seams above and below the waterline
• Super smooth finish with easy sanding after cure
• Suitable for both manual and automatic mixing
• Low VOC base formula — Base (D8200) rated at 0 g/L VOC
• Shore D hardness of >60 after 7 days at 77°F (25°C)
• Sandable at 77°F (25°C): approximately 17 hours (standard cure) or 6 hours (fast cure)
• Apply with trowels, spatulas, longboard battens, or putty knives

Application Notes:

• Apply only over properly prepared Awlgrip primers; Hullgard Extra Epoxy Primer and High Build are recommended substrate primers
• When used below the waterline, must be sealed with Hullgard Epoxy Primer (D6070/D3707)
• When used above the waterline, seal with an Awlgrip Epoxy Primer such as High Build or Ultra Build to maximize gloss and color holdout
• Awlfair LW must be sanded before recoating with itself or any other primer
• Do not add thinners or reducers to Awlfair LW

Compatible Converters: D7200 (Standard Cure) | D7222 (Fast Cure)

Awlfair LW is backed by extensive laboratory research and development and has been tested and approved across a wide range of professional Awlgrip coating systems. Available in quart, gallon, 2-gallon, and 5-gallon sizes.