Keel Guard 20110 KeelGuard Keel Protector 10ft White DIY Hull Guard

The Megaware KeelGuard (MPN: 20110) is the original, patented do-it-yourself keel protector engineered to shield your boat's hull from the damaging effects of rocks, concrete launch ramps, abrasive sand, and oyster beds. Made in the USA, this 10-foot white keel guard is purpose-built for long-lasting hull protection without the need for professional installation.

Damage to a boat's keel can break down its protective gelcoat finish, allowing water to penetrate and destroy fiberglass laminates beneath. The Megaware KeelGuard defends against this damage with an abrasion-resistant, shock-absorbing blend of polymers and urethanes that delivers optimal durability and pliability in demanding marine environments.

Key Features:

• Exclusive Contoured Self-Sealing Edge — The pressure-sensitive 3M adhesive permanently bonds and seals the contoured edges directly to the hull surface with no messy sealants required
• Ultra-Tough Polymer Composite — Precision blend of polymers and urethanes for abrasion resistance and flexible, long-term durability
• Hydrodynamic Drag Reduction Design — Angled grooves produce hydrodynamic channels that create air pockets for a slicker surface, so performance is not compromised
• Premium 3M Acrylic Pressure-Sensitive Adhesive — Co-developed with 3M engineers for maximum bonding strength and adhesion reliability
• UV-Stabilized Color — White finish is UV-stabilized to resist fading and maintain true color over the life of the product
• Easy DIY Installation — No special tools required; installs in four basic steps using the included Scotch-Brite pad, 3M primer, and burnishing tool
• Lifetime Hassle-Free Warranty — Guaranteed against abrasive wear and adhesion failure during normal use for as long as you own your boat

The KeelGuard should be installed at an ambient temperature of 60°F or above. Typically mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the keel. Not recommended for boats whose trailers use center rollers or a support beam along the keel unless the rollers can be cleared.