T-H Marine ZL10DP Z-Launch Watercraft Launch Cord 10'

The T-H Marine Z-LAUNCH™ Watercraft Launch Cord (ZL10DP) is a patented launch cord that makes solo launching of a boat, jet ski, or tow tube easier. Made of premium elastics, it uses automatically adjusting tension as you back your watercraft into the water, so it won't jerk the watercraft around when you pull the trailer forward.

Key Features:

• Expands to more than 20'
• Attaches in just 3 steps: fasten a hook to your trailer, connect a steel ring to the winch, and lock the winch
• Unlike rope, will not jerk your watercraft or you
• Simple and safe operation with a no-hassle design
• Lets you stay safe and dry when launching your boat alone
• Great for ramps with "no power" laws

How to Use:

1. Attach the spring-loaded clasp to the eye hook of your watercraft.
2. Attach the stainless steel ring to your trailer winch hook. Pulling out approximately 2-3 feet of winch belt before locking the winch is recommended.
3. Lock your trailer winch.
4. Once the first three steps are complete, detach all safety and tie-down straps from your trailer to prepare the boat for launch.
5. Slowly back the trailer and boat into the water until the boat floats backwards.
6. Slowly pull the vehicle forward. The cord expands and pulls your boat toward the ramp.
7. As the craft comes to rest at the ramp, continue pulling forward until the trailer is clearly out of the water.
8. Detach the cord by releasing the trailer winch and unsnapping the ring and clasp from the trailer and watercraft.
9. Secure your boat to the dock or shore and park your vehicle.