The Pettit EZ-Tex Rapid Cure 7200 is a professional-grade, two-part marine epoxy repair compound engineered for high-strength, waterproof, and permanent repairs on the water or at the dock. Formulated specifically for quick mechanical repairs dockside or at sea, this epoxy compound gets you back underway fast with minimum downtime.
EZ-Tex Rapid Cure bonds tenaciously to a wide variety of surfaces including fiberglass, wood, metals such as aluminum, and other marine materials. Its thick, buttery consistency stays in place during application — it will not sag, shrink, or run — making it ideal for vertical or overhead repairs. The convenient 1:1 mixing ratio means both components share the same consistency, eliminating guesswork and reducing waste.
Key Features:
- Rapid 1-hour cure at 70°F with a 5-minute tack-free working time
- 100% waterproof when cured — suitable for use above and below the waterline
- High-strength formula creates a permanent, tenacious bond to most surfaces
- Non-sagging, non-shrinking consistency ideal for filling cracks, gouges, and voids
- Simple 1:1 mixing ratio — both components have matching consistency for easy measuring
- Once cured, can be sanded, drilled, tapped, sawed, and painted
- Less wasteful and easier to measure and mix than competing products
Common Applications:
- High-strength repairs to fiberglass, wood, and metals
- Repairs on aluminum jon boats and pontoons
- Filling stripped screw holes and areas where hardware has been pulled out or removed
- Non-structural crack repair in fiberglass and wood
- Emergency spot repairs dockside or underway
EZ-Tex Rapid Cure 7200 comes in a convenient 2 oz kit. Apply with a putty knife or spatula, allow to cure, then sand smooth and finish with an appropriate coating system. California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
