Lectrotab XKA12X12A 12x12 Aluminum Alloy Trim Tabs with Actuators

The Lectrotab XKA12X12A is a 12" x 12" aluminum alloy trim tab kit with actuators. It is designed for aluminum-hulled boats and is also an economical option for other boats. The tabs are sealed with a corrosion-resistant epoxy coating and use a "no-break" polypropylene hinge. Each actuator is a non-hydraulic, maintenance-free unit with quiet operation, so there is no oil to leak. The actuator assembly is self-contained, and no components need to be installed inside the boat.

Features:

• Tabs sealed with a corrosion-resistant epoxy coating
• Strength equivalent to 10 gauge stainless steel
• "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
• Upper ram seal location cannot be damaged by a fouled ram or barnacle growth
• Internal pressure equalization system
• Internal brake system prevents unwanted tab movement when under way or backing down
• Actuators fully load tested to push 1000 lbs of force
• Non-metallic external structure that cannot corrode and will not deteriorate in the sun or under water
• Actuator assembly in a non-metallic, permanently sealed housing
• Actuator uses either a standard or low profile transom mounting bracket

Technical Specifications:

• Trim tab size (L x W): 12" x 12" (30 x 30 cm)
• Boat length: 18' to 32' (5.5 to 9.5 M)
• Tab material: marine grade 6005-T5 aluminum alloy
• Actuator voltage: 12 V DC
• Actuator stroke length: 2.25" (57 mm)
• Actuator cable length: 23' (7 M)
• Actuator vertical height: 11.875" (302 mm)

In the Box:

• Two (2) aluminum alloy tabs
• Two (2) actuators with 23' (7 M) cables
• Instruction manual

Control switch not included.