Xanigo Marine XMMMP1G XANIGO MARINE MOLD AND MILDEW PREVENTER - 1 GALLON
Mold & Mildew Preventer - 1 Gallon
Say goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.
Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.
Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover!
Features:
- Long-lasting residual protection
- World's only patented organosilane compound, which provides greater protection
- No alcohol and non-flammable
- Water-based (only water-based organosilane)
- Long shelf life of 1.5 years unopened, 1 year opened
Specifications:
The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat Seats
STEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain Remover
Xanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.
STEP 2: Neutralize the Remover
After rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.
STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew Preventer
With just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.
Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.
STEP 4: Maintain Seats with Xanigo Marine's Waterless Wash
Keep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.
Also, a great way to shine up a gel coat quickly!
