Go Power GPDKCIT2 DC Inverter Fuse and Cable Installation Kit for 600-1000W Inverters

The Go Power GP-DC-KIT2 DC Inverter Fuse and Cable Installation Kit provides everything needed to safely and correctly connect a Go Power inverter to your battery bank. Designed for use with 600–1000W inverters on 12V systems and 600–1800W inverters on 24V systems, this kit eliminates guesswork on wire sizing and fuse selection for a clean, professional installation.

Key Features:

• Class-T Slow-Blow Fuse Block: Extra heavy-duty DC-rated fuse block with a 110-amp Class-T slow-blow fuse, rated at 160 VDC with a 50,000-ampere interrupt rating
• Pre-Lugged #4 AWG Battery Cables: Includes 10 feet of large-gauge #4 AWG battery cables with pre-installed lugs for plug-and-play installation
• Insulated Fuse Block Housing: Fuse block features an insulated fiberglass-reinforced polycarbonate base with 5/16" studs and a transparent protective cover
• Complete Hardware Included: Kit includes 11" cable ties, 3/8" cable clamps, and #10 x 3/4" mounting screws for a full installation
• Universal Compatibility: Fuse block operates on 12V, 24V, 32V, or 48V inverter battery systems

What's Included:

• 110A Class-T Fuse Block with protective cover
• 10 ft. #4 AWG pre-lugged battery cables
• 11" cable ties
• 3/8" cable clamps
• #10 x 3/4" pan head screws

The GP-DC-KIT2 is the recommended DC wiring solution for Go Power inverter installations requiring a fuse block (not an inline fuse). Per Go Power's installation guidelines, the fuse should be positioned within 12 inches of the battery for proper circuit protection.