Interlux Paint VC Performance Epoxy Kit

Interlux VC Performance Epoxy is a two-part, low-friction racing bottom paint. It gives a hard, smooth underwater finish on boats that don't need antifouling protection. The epoxy contains PTFE (a fluoro-microadditive). It is made for the underwater surfaces of performance powerboats and racing sailboats. It also suits trailered and rack-stored boats.

Key Features:

• Two-part epoxy that cures to a hard, durable, semi-gloss white finish
• Fluoro-microadditive adds lubricity and makes wet sanding and burnishing easier
• Stain-resistant surface that is easy to clean and withstands vigorous scrubbing
• Can be applied to gelcoat, bare fiberglass, epoxy and properly primed metal, including aluminum hulls and outdrives (see the Technical Data Sheet)
• Best applied by spray, but can also be applied by roller or brush
• Mixes 1:1 by volume. Thin with Interlux 2316N reducing solvent if needed
• Typically applied in three to four coats, as needed

Please note: This product has no antifouling or foul-release properties. Only apply it over previous coatings that are two-component products specified for underwater use. Remove any single-part paint, such as antifouling paint, first. For a similar hard, smooth finish with an antifouling biocide, look at Interlux VC Offshore.