Seahawk Paints Tuff Stuff High-Build Epoxy Primer Kit Light Gray

Seahawk Paints Tuff Stuff is a high-build, two-part marine epoxy primer for blister prevention and repair, bilge coating and metal priming. It dries quickly, so a complete barrier coat system and bottom paint can be applied in about two days. It is also sold as an epoxy barrier coat or blister protection primer.

Key Features:

• Microsheet silicate technology: overlapping microscopic sheets form a water barrier that helps protect the surface from moisture penetration.
• Blister prevention and repair: use it as a repair coat over blistered fiberglass or as a barrier coat over unblistered fiberglass.
• Bilge coating: resists oil and water.
• Universal metal primer: gives corrosion protection on most metals below the waterline. It can also be used to prime any metal.
• High build: fills deep scratches and gouges in a few coats, so fewer coats are needed.
• Easy to use: a longer window between coats means less labor and less haul-out time.
• Matte finish with about 52% volume solids.
• Application: airless or conventional spray, solvent-resistant roller or brush.
• Mixing: mixed at a 1:1 ratio of Side A to Side C. Allow an induction time of 20-30 minutes before application.

Tuff Stuff works well on props, shafts, keels, trim tabs, thru-hulls and lower units. Follow the manufacturer's technical data sheet for surface preparation, overcoat timing and recoat windows to get the best adhesion.