Awlgrip D8002G High Build Epoxy Primer White Base Gallon

Awlgrip D8002G is a professional two-component epoxy surfacer designed for high build applications where filling and surface leveling is required. This premium primer offers outstanding corrosion resistance and adhesion properties for steel, aluminum, wood, and fiberglass substrates. Not intended for use below the waterline.

Key Features:

• Protects filler from solvent leaching and ensures VOC compliance when used with D3002 converter and T0176 reducer
• Can be applied with conventional or airless spray equipment
• Works best as a surfacer over other Awlgrip primers and fairing compounds
• Applies in even coats of 8-10 mils wet film thickness, yielding 4-5 mils dry film thickness
• Simple 1:1 mixing ratio - one part base to one part D3002 converter
• Excellent anticorrosive properties for long-lasting protection

May be applied directly to properly prepared wood or fiberglass surfaces, though best results are achieved when these surfaces are first sealed with 545 Primer. Allow 15-minute induction time after mixing before application. Two to three coats may be necessary depending on project requirements. This is a white base gallon size suitable for marine, automotive, and industrial refinishing projects.