Keel Guard 20108 KeelGuard Keel Protector 8ft White DIY Boat Keel Guard

The Megaware KeelGuard (MPN: 20108) is the original do-it-yourself keel protector, engineered to defend your boat's hull from the damaging effects of abrasive sand, rocks, concrete boat ramps, and oyster beds. Unprotected keel wear can degrade your boat's gelcoat finish, allowing water to infiltrate and destroy the underlying fiberglass laminates — the KeelGuard stops that damage before it starts.

Co-developed with both boat designers and 3M engineers, every aspect of the KeelGuard's patented design works together to deliver maximum protection without compromising performance. The ultra-tough polymer composite construction — made from a precise blend of abrasion-resistant polymers and urethanes — delivers outstanding durability while remaining pliable enough to conform to most hull shapes. Angled grooves produce hydrodynamic channels that create air pockets along the hull surface, reducing drag so your boat's speed and handling remain unaffected.

Installation is a straightforward DIY project requiring no special tools and typically takes about one hour. The exclusive self-sealing contoured edge bonds tightly to the hull surface without messy sealants, and the powerful 3M pressure-sensitive adhesive provides a permanent, watertight bond. This white KeelGuard is UV-stabilized to maintain its color throughout the life of the product.

Key Features:

• Ultra-tough polymer composite construction — abrasion-resistant blend of polymers and urethanes
• Patented hydrodynamic drag-reduction channels — maintains boat speed and performance
• Exclusive self-sealing contoured edge — no messy sealants required
• Premium 3M pressure-sensitive adhesive — permanent bond, no curing time needed
• UV-stabilized white color — resists fading for the life of the product
• Made in the USA by Megaware, a family-owned and operated company
• Lifetime no-hassle warranty — covers abrasive wear and adhesion failure for as long as you own your boat
• DIY installation — no special tools required, installs in approximately one hour

What's Included:

• KeelGuard strip (8ft, White) pre-bonded with 3M adhesive
• 3M primer wipe
• Scotch-Brite etching pad
• Burnishing tool
• Detailed step-by-step installation instructions

Suitable for most fiberglass and select aluminum boats. Not recommended for boats whose trailers use weight-bearing rollers or bunks that contact the keel. Best installed at an ambient temperature of 60°F or above. Isopropyl alcohol (not included) is needed for surface preparation.