Product reviews for Seachoice DE77201S Fender Kit Twin Eye 5.5x20 Wht
Write your own review
Existing reviews
Best price and decent shipping
From:
Wilson N
|
Date:
4/1/2017 11:49 PM
Easy to follow, and found what I was looking for at a very reasonable price. I will be back for more. Customer service very very friendly and helpful when i had to return a part. Was completely no hassle and will gladly keep shopping with Autoplicity for my cars needs through it's lifetme.
From:
Reynaldo Villasenor I
|
Date:
3/22/2017 12:44 PM
It's been Good, Happy with Service and product.
From:
Anonymous Customer
|
Date:
2/26/2017 9:42 AM
Easy to find part and easy to use website.
From:
Roger
|
Date:
2/16/2017 2:32 PM
No complaints. ordered a BAK Industries Truck Bed Cover BakFlip G2 for my Honda Ridgeline on 1/11/12. Package was shipped on 1/13/12 and arrived 1/18/12, delivered undamaged. <br><br>Autoplicity was cheaper than Amazon by about $40 (after shipping), and I didn't need to compromise on service. I would definately use them again.
From:
cshaw88
|
Date:
12/22/2016 3:37 PM
The bronze colored seal cap on the transmission side of the axle must be protected. Any deformity of this piece will render the axle unusable.
From:
Leslie H
|
Date:
11/6/2016 1:54 AM
Fast service and the cheapest price on the web. My item arrived on time and in good shape. Order Number: 11517<br>
From:
davidray00
|
Date:
10/11/2016 12:39 PM
surprised you had my part. no one else has it. you saved my like. thanks
2/15/2016; received my axle hub today. it is completely wrong for my 1963 Plymouth fury.
the height is too long by .125 inch. as a result the hub bottoms out on the brake backing plate. I cannot tell if the internal taper is correct for proper installation.
the anti rotation key slot is too small and does not go all the way thru the internal diameter of the hub. the key slot is .125 inch. it should be .312 inch.
the bolt diameter for the studs is supposed to be 4 1/2 inches. the hub is 5 1/2 inches.
i can send photos of the two units side by side for your confirmation
2/15/2016; received my axle hub today. it is completely wrong for my 1963 Plymouth fury.
the height is too long by .125 inch. as a result the hub bottoms out on the brake backing plate. I cannot tell if the internal taper is correct for proper installation.
the anti rotation key slot is too small and does not go all the way thru the internal diameter of the hub. the key slot is .125 inch. it should be .312 inch.
the bolt diameter for the studs is supposed to be 4 1/2 inches. the hub is 5 1/2 inches.
i can send photos of the two units side by side for your confirmation
From:
Joe M
|
Date:
10/4/2016 9:47 AM
Was easy step by step. Description of manual was right but not picture. Hope I get right one.
From:
Thomas S
|
Date:
10/4/2016 9:44 AM
