Samlex SDC15 24V to 12V DC-DC Step-Down Converter 12A 13.8V Output

The Samlex SDC-15 is a switching DC-DC converter (also called a step-down converter or voltage reducer) that converts a 24 VDC nominal input to a regulated 13.8 VDC output at 12 amps. It is designed for heavy duty applications where 12 volt equipment must run from a 24 volt system.

The SDC-15 is non-isolated, meaning there is no galvanic isolation between input and output, and it is meant for use in negative ground systems. Its advanced switch-mode design delivers high efficiency, and the compact, lightweight housing can be mounted in almost any location.

Key Features:

• Advanced switch-mode design with high efficiency
• Overvoltage and short-circuit protection
• Temperature compensated current limit
• Cycle-by-cycle current limiting circuit
• Output-side overvoltage protection
• Input-side overvoltage and transient protection
• Input-side reverse polarity protection
• Compact and lightweight, mounts in almost any location

Specifications:

• Input voltage: 20-35 VDC (24 VDC nominal)
• Output voltage: 13.8 VDC (12 VDC nominal)
• Output current: 12 amps
• Weight: 2 lbs
• Dimensions: 7.75 x 5 x 2.5 in

Applications:

• Earth moving equipment
• Heavy trucks
• Buses
• Marine vehicles
• CB radios
• 12 volt lighting systems
• AM/FM sound systems

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.