Awlgrip D8200G Awlfair LW Two-Component Epoxy Trowelable Fairing Compound Base White 1 Gallon

For Professional Use Only. Awlgrip Awlfair LW (D8200G) is a premium, two-component epoxy trowelable fairing compound engineered for fairing, leveling, and smoothing surface imperfections including gouges, pitting, dents, and weld seams. Suitable for use both above and below the waterline, Awlfair LW delivers a professional-grade finish backed by Awlgrip's extensive laboratory research and development.

This listing is for the Base Component Only (White, 1 Gallon). A converter must be purchased separately — choose either the Standard Converter (D7200) or the Fast Converter (D7222) depending on your working conditions and schedule.

Key Features:

• Premium two-component epoxy formulation for fairing, leveling, and smoothing
• Repairs gouges, pitting, dents, and weld seams above and below the waterline
• Super smooth finish with easy sanding characteristics
• Compatible with both manual and automatic mixing equipment
• 1:1 mix ratio by volume with converter (D7200 or D7222)
• White base, red converter — turns pink when properly mixed
• Zero VOC base (0 g/L)
• Shore D hardness greater than 60 after 7-day full cure

Cure Times (Standard Converter at 75°F):

• Dry to touch: 8 hours
• Resistant to foot traffic: 24 hours
• Full cure: 7 days
• Pot life: 1.5–2 hours

Cure Times (Fast Converter at 75°F):

• Resistant to foot traffic: 7 hours
• Full cure: 7 days
• Pot life: 30–35 minutes

Application & Recoating Notes:

• Apply over properly prepared Awlgrip primers only; Awlfair LW may be applied directly to Hullgard Extra without sanding
• Must be sanded before recoating with itself or any other primer
• Must be overcoated with an epoxy primer (such as High Build, Hullgard, or Ultra Build) before applying a finishing topcoat system
• Clean equipment with T0006, T0002 reducers, or MEK
• Do not add thinners or reducers to the mixed compound
• Do not apply below 55°F (13°C) or above 104°F (40°C)

Coverage: Approximately 6.8 sq. ft. per gallon at 240 mils (6,000 microns) DFT.

Awlfair LW is a trusted choice among professional marine painters and boatyard applicators for achieving smooth, fair hull surfaces before topcoat application. OEM cross-references include D8200, D8200G, D8200/1GLUS, and D82001GLUS.