Prop Speed Dewaxers & Strippers
Prop Speed Stripspeed: Purpose-Built Marine Surface Preparation
When it comes to maintaining a vessel's underwater running gear, preparation is everything. Prop Speed — the brand behind the original propeller and running gear foul-release coating system — understands this better than anyone. That same engineering focus that shaped their flagship coating technology also produced Stripspeed, their dedicated dewaxer and stripper designed specifically to prepare metal surfaces before reapplication of foul-release coatings.
Stripspeed fills a critical role in the dewaxers & strippers category by addressing a challenge unique to the marine industry: how do you efficiently and safely remove a slick, chemically bonded foul-release coating from complex underwater metal geometry — shafts, rudders, propellers, struts — without damaging the metal itself? Grinding and abrasives can cause mechanical wear over multiple refit cycles, but Stripspeed takes a different approach entirely.
What Makes Stripspeed Stand Out
Stripspeed is formulated as a thick gel, which gives it a key practical advantage on the hard-to-reach surfaces common in marine maintenance. Its consistency allows it to cling to vertical and overhead surfaces without sliding off — a real benefit when working around propellers and shafts in confined boatyard conditions. According to Prop Speed, the product can remove old foul-release coatings in 30 minutes or less under typical conditions, significantly cutting down on prep time and labor costs.
From a safety and environmental standpoint, Stripspeed sets itself apart from many conventional strippers. It is non-flammable and non-caustic, and its formula is free of DCM (dichloromethane) and NMP (N-methyl-2-pyrrolidone) — two solvents that have faced increasing regulatory scrutiny due to health and environmental concerns. This makes Stripspeed a responsible choice for professional applicators and DIY boaters alike.
Unlike mechanical stripping methods, Stripspeed does not generate airborne particles or debris during removal, which means a cleaner, safer work environment and no risk of introducing micro-scratches or surface irregularities that could compromise the bond of the next coating application. The result is a metal surface that is properly prepared, extending the performance and longevity of the Propspeed coating system over multiple seasons.
The Right First Step for Every Reapplication
Prop Speed positions Stripspeed as the essential first step in any foul-release reapplication workflow. The application process is straightforward: shake the bottle vigorously to activate the gel consistency, apply a generous layer (at least 2mm thick) over all metal surfaces where old coating is present, allow it to work, then scrape and scrub with an abrasive pad. No specialized equipment is required — just proper safety gear and the product itself.
Whether you're a professional marine yard applicator maintaining a commercial fleet or a recreational boater keeping your propeller in peak condition, Prop Speed's Stripspeed brings the same level of purpose-built engineering to the prep stage that the brand is known for in protective coatings. It completes the system, ensuring every layer of foul-release protection starts with a clean, properly prepared foundation.