Leland Inflatable PFD Re-Arming Kit Manual Threaded Life Vests-Inflatables

Leland Inflatable PFD Re-Arming Kits for manual-pull life vests let you restore an inflatable life jacket to ready condition after it has been inflated. Each kit is a CO2 re-arm kit (also called a rearming kit or CO2 cylinder replacement) built for manual inflatable PFDs. Re-arming adds another season of use to your inflatable life vest.

Key Features:

• Made for re-arming inflatable life vests that use a manual-pull inflator
• Each kit contains one threaded CO2 cylinder, a green indicator pin and step-by-step re-arming instructions
• The green indicator pin shows the inflator has been re-armed
• UL Marine classified
• Not for use with self-inflating (automatic) PFDs

Important Safety Notes:

• Check your life jacket's owner's manual and make sure the kit matches it. Using the wrong re-arming kit can be dangerous.
• This is a one-time-use product. Once the CO2 cylinder has been punctured to inflate the vest, it must be replaced.
• Use only with the PFD models the kit is specified for.
• The cylinder is under pressure. Do not incinerate it, expose it to sun, or store it above 120 °F (50 °C).
• Keep away from children.

Leland Ltd. makes CO2 cartridges and re-arming kits for inflatable PFDs. Choose the cylinder size and thread type specified by your life jacket manufacturer.