Pettit Paint Fairing Compounds

Pettit Paint Fairing Compounds: Professional-Grade Surface Repair for Boaters

Pettit Paint has been a cornerstone of the marine coatings industry since 1861, and that deep expertise carries directly into their fairing compounds lineup. When a hull needs to look its best — and perform at its best — fairing is the critical step that bridges raw damage repair and a flawless finish coat. Pettit's approach to fairing compounds brings the same precision chemistry that has made their antifouling paints and epoxy systems legendary among serious boaters.

The EZ-Fair Epoxy Fairing Compound

Pettit's flagship offering in this category is the EZ-Fair Two-Part Epoxy Fairing Compound (Part #7050). EZ-Fair is a lightweight, two-part epoxy putty designed for filling and smoothing surface imperfections above and below the waterline. It is available in multiple formats, including convenient pre-measured cartridges for small touch-up work and larger quart-size kits for more extensive projects.

What sets EZ-Fair apart from generic marine fillers is its chemistry. The special resins used in EZ-Fair impart a high degree of water and chemical resistance to the product, making it an integral part of the Pettit Gelcoat Blister Repair System. This means it is not just a surface cosmetic fix — it actively contributes to waterproofing the repair zone, which is essential in any marine environment where osmotic blistering is a concern.

Versatility Above and Below the Waterline

One of EZ-Fair's most practical strengths is its versatility across substrates and locations. With high chemical and water resistance, this lightweight compound is excellent for fairing metal keels and also works well for filling and fairing damage on most fiberglass, wood, or metal surfaces. Whether you're smoothing a freshly repaired fiberglass hull, leveling a cast-iron keel, or filling gouges in a wooden transom, EZ-Fair handles the job without requiring a different product for each material.

Fast-Cure Formula for Efficient Work Days

Boatyard time is valuable, and Pettit designed EZ-Fair with that reality in mind. The compound is non-sagging, non-shrinking, and sands to a smooth finish, while the quick-cure formula allows for multiple coats to be applied and sanded in a single day. With a pot life of approximately 10 minutes and a hand-sand readiness of around 3 hours (or 4 hours for DA/random orbital sanding), experienced boaters can plan a full fairing session within a single workday — a major advantage when working to a haul-out deadline.

Part of a Proven System

Pettit doesn't design EZ-Fair to work in isolation. It fits naturally into the broader Pettit marine coating ecosystem. After fairing, boaters can follow with Pettit Protect epoxy primer to create a sealed barrier before applying topside or antifouling paint — ensuring every layer from bare substrate to final coat works in chemical harmony. This systems approach is a hallmark of Pettit's philosophy, and it's why Pettit Marine Paint is recognized as a global market leader in antifouling paints, epoxies, varnishes, and sealants for the marine industry.

Whether you're completing a blister repair, restoring a neglected hull, or fine-tuning the lines of a racing sailboat, Pettit's fairing compounds deliver the durability and workability that serious boaters have come to expect from a brand with over 160 years of marine coating experience.