Seachoice Lifting Eyes & Cleats

Seachoice Lifting Eyes & Cleats: Engineered for the Bow

When it comes to safely hauling a boat out of the water, the hardware attached to the bow is the last thing you want to question. Seachoice has been building trust in the marine hardware space since 1988, and their line of lifting eyes and cleats reflects decades of purpose-driven engineering. These are not generic fasteners — they are a coordinated system of stainless steel components designed to work together for reliable bow lifting applications.

A Modular Lifting System Built Around Stainless Steel

What sets Seachoice apart in this category is how their lifting hardware functions as an integrated system rather than standalone pieces. At the heart of it is the Lifting Adapter Plate (30201), a 304 stainless steel plate installed on the inside of the bow that features a rotating crossbar to accommodate any bow angle. The crossbar accepts a 5/8-inch threaded rod, and the entire assembly anchors the lifting eye securely through the hull.

That threaded rod — the Seachoice SS Threaded Rod (30190) — is a 36-inch, 5/8"-11 thread count 304 stainless steel rod specifically engineered to connect the adapter plate to the lifting eye above. These components are designed to be used together, and Seachoice is explicit that for any overhead lifting application, all three elements must be properly installed in combination.

Lifting Eyes: Two Configurations for Different Needs

Seachoice offers two primary lifting eye configurations, each rated for real-world load demands:

• Lifting Eye Without Cleat (30231): Constructed from 316 stainless steel, this eye is tapped for a 5/8" threaded connecting rod and carries a maximum vertical load rating of 3,000 lbs. The 1-1/2" inner diameter ring provides a solid attachment point for lifting straps or hooks.
• Lifting Ring with 6" Cleat (30241): Also made from 316 stainless steel, this combination unit integrates a 6" cleat directly into the bow hardware, adding dual-purpose functionality. It features a 2" base diameter, 2" height, and a maximum vertical load rating of 4,000 lbs — making it the heavier-duty option in the lineup.

Pull-Up Cleats: Low-Profile, Deck-Friendly Design

Seachoice rounds out this category with their pull-up cleat series, offered in 4-1/2" and 6" sizes. Cast from 316 stainless steel, these cleats feature a streamlined, flush-to-deck design with four countersunk mounting holes. When stowed, the cleat recesses completely flush to the deck surface, eliminating snag hazards for lines and crew. They require only 2-1/2" of clearance below the deck — practical for a wide range of hull constructions.

Why 316 Stainless Steel Matters on the Water

The choice of 316 stainless steel for primary structural components is intentional. In a saltwater environment, corrosion is an ever-present threat to hardware integrity. 316 stainless offers superior resistance to chloride-rich environments compared to the more common 304 grade, which Seachoice reserves for internal and secondary components like the adapter plate and threaded rod. This material distinction speaks to a brand that understands how marine conditions degrade hardware over time.

Seachoice backs all of its products with a no-hassle warranty — a practical guarantee that aligns well with hardware that must perform safely every time a boat is hauled. For boaters who want a proven, purpose-engineered system for bow lifting, Seachoice's lifting eyes and cleats deliver the reliability and material quality the job demands.