Trilux 33 aerosol antifouling paint safely protects aluminum outdrives and outboards against marine growth.
Trilux® 33 aerosol is specifically formulated to provide safe and effective protection against marine fouling for aluminum outdrives, outboards and all underwater metals. Trilux 33 aerosol will not cause galvanic corrosion. To prevent marine growth, Trilux 33 uses two biocides plus contains Biolux technology to prevent slime.
Trilux 33 aerosol can be used in fresh-, salt- and brackish water. In addition to aluminum outboards and outdrives, Trilux 33 is also a good choice for trailerable aluminum skiffs and other boats with aluminum hulls that are kept in the water on a seasonal basis. With easy aerosol application, Trilux 33 is a great choice for do-it-yourselfers. Prime bare metal first with Primocon Aerosol, Model, SKU 3732872). 16oz.
Key Features
- Safe for outboards and outdrives Easy aerosol application
- Will not cause galvanic corrosion
- Can be used on all underwater metals
Physical Data
- Type: Aerosol antifouling for aluminum
- Finish: Matte
- Components: 1
- Solids by volume:14%
- Coverage: 21.2sq.ft./gal.
- VOC: 470g/liter
- Active ingredients: Cuprous thiocyanate
- Flash point: 98°F
- Quantity: 16oz.
Application
- Application Method: Spray
- Number of coats recommended: 2
- Dry Film Thickness: 2 mils
- Applicator: Aerosol can
- Application temperature Min. /Max. Range: 10°C/50°F and maximum 29°C/85°F.
Drying Times*(Hours)
| Drying | @41°F | @50°F | @73°F | @95°F |
| To touch | 45 min. | 30 min. | 30 min. | 30 min. |
| To recoat | 18 hr. | 12 hr. | 6 hr. | 4 hr. |
| To launch | 24 hr. | 16 hr. | 12 hr. | 8 hr. |
*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.
More information
For detailed application instructionssee the NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.
