Quicksilver 8M0082536 Throttle and Shift Cable 13 ft Platinum Plus Gen II

The Quicksilver 8M0082536 Throttle and Shift Cable is a 13-foot replacement control cable from the Platinum Plus line, built with Generation II connections. It links the remote control to the engine throttle and shift attachment points.

Key Features:

• 13 feet long with Generation II connections
• Built for long life and maximum performance in all weather conditions, down to below 0°F
• Layered construction for a smooth-operating, durable control cable
• Polypropylene outer jacket resists UV and abrasion
• Lubricated core liner surrounds the stainless steel core to resist the harsh marine environment while staying flexible

Choosing the Right Length:

Check the length and part number printed on the original cable connected to your control and engine. You can also measure the path from the control to the engine throttle/shift attachment point along the unobstructed cable route. For outboard installations, add 18 inches.

Installation and Service Notes:

• Remove the old or damaged cable and install the new cable in reverse order, using common tools
• Do not lubricate the core
• Avoid tight or sharp bends during installation
• This cable cannot be repaired, only replaced
• Replace the cable if you feel excessive free play or stiffness at the control, or see chafed, broken, bent or loose parts