Seachoice Scupper Valve
A self-bailing cockpit only works as well as the hardware at its drain. Seachoice scupper valves are built for this job: letting water escape the cockpit freely while keeping it from washing back in. Seachoice has supplied marine hardware and OEM replacement parts since 1988, and its scupper valves reflect that focus on practical, replaceable components that boaters can swap in at the dock or in the driveway.
How Seachoice Scupper Valves Work
Scupper valves are one-way check valves. Water from rain, spray, or a boarding wave drains out through the opening, and the valve closes to stop water from re-entering. Seachoice's classic design uses a rubber flapper that opens to drain water out and closes against backwash. The flapper is paired with a gasket and a fiberglass-reinforced retainer ring, a combination intended to hold up to sun, vibration, and constant wet-dry cycling.
Seachoice Scupper Valve Styles
Seachoice offers more than one approach to the same problem, so you can match the valve to the boat:
- Flapper-style scupper valve (part 18261): A 2-7/8" diameter valve with a high-impact, fiberglass-reinforced white plastic ring, rubber flap, and gasket. It is made for boats with self-bailing cockpits and mounts on the transom above the waterline, fastening with #6 screws.
- Ball-style scupper valve (part 18271): A clear, 2-7/8" design with a polycarbonate housing and a solid polyethylene ball. The ball moves to drain water out, then seals the opening to prevent backflow. It is designed to mount over existing thru-hull fittings with 3/4" to 1-1/2" openings and accepts six #8 fasteners.
The flapper style is a straightforward, familiar choice for replacing worn or hardened flaps. The ball style gives you a different sealing mechanism and a clear housing if you are fitting over an existing drain opening.
What to Consider When Choosing a Scupper Valve
- Diameter and hole size: Measure the existing opening and the footprint of the flange before ordering. Both Seachoice styles above are 2-7/8" in outside diameter, but the opening each is designed to cover differs.
- Mounting location: These valves are intended for transom mounting above the waterline. Always confirm that your drain sits above the waterline under load.
- Fasteners and sealing: Check the screw size and count for your chosen valve, and replace the gasket when you replace the valve so the flange seals properly against the transom.
- Flapper condition: Rubber flappers can stiffen, curl, or crack with age. If water lingers in the cockpit or splashes back in, the valve is a likely culprit.
Why Seachoice for Drainage Hardware
Seachoice's catalog spans thousands of marine parts across 17 categories, including plumbing, hardware, fasteners, and safety equipment. That breadth means a scupper valve can be paired with matching fasteners and related plumbing components from the same line. The company states that its products carry a one-year limited warranty against manufacturing defects under normal use.
For a broader look at the manufacturer, visit the Seachoice brand page. To compare other drainage options from different makers, browse the full Scupper Valve category.