Racor Racor Fuel/Air Separators
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
Racor Fuel/Air Separators: Environmental Protection for Marine Fuel Systems
When it comes to preventing fuel spillage and meeting environmental regulations, Racor has engineered a specialized solution that addresses a common problem for boat owners. Installed in the fuel tank vent line, the Racor Fuel/Air Separator efficiently separates air from fuel forced into the line, with air vented and all fuel returned to the tank. This innovative approach to fuel/air separation tackles an issue that many marine enthusiasts overlook during refueling operations.
The Lifeguard LG100: Racor's Flagship Fuel/Air Separator
The Racor LG100 Fuel/Air Separator efficiently separates air from fuel being forced into the vent line using a three-stage process. The Fuel/Air Separator captures fuel normally discharged due to agitation and thermal expansion up to 2.4 PSI. During typical refueling operations, boats can lose significant amounts of fuel through vent lines—a problem that's not only costly but also environmentally damaging and potentially subject to regulatory penalties.
There are no moving parts, nothing to rust or corrode, making these separators virtually maintenance-free. Each unit includes standard 5/8" male hose barbs, hose clamps and instructions, allowing for straightforward installation directly into existing vent lines. The separator replaces a section of the vent line and works continuously to protect both your vessel and the surrounding waterways.
Why Racor Fuel/Air Separators Matter for Marine Applications
Beyond fuel savings, Racor's fuel/air separators address multiple concerns for boat owners. It eliminates damage to expensive striping and labels and protects finishes from fuel stains. The RACOR Lifeguard Marine Fuel/Air Separators meet USCG pleasure craft requirements and allow fuel tank top-off without overboard spillage. This compliance feature is increasingly important as environmental regulations become more stringent for recreational and commercial vessels.
The separators work not only during refueling but also during vessel operation. The LG100 captures fuel that normally gets discharged because of agitation while under way and from thermal expansion as the temperature rises. This continuous protection ensures that fuel stays in your tank where it belongs, whether you're at the dock or out on the water in rough conditions.
Simple Installation, Long-Term Benefits
Racor has designed these fuel/air separators for easy integration into existing marine fuel systems. The units fit inline within the vent line system, requiring no complex modifications to your vessel. For boats with multiple fuel tanks, one separator is required per vent line to ensure complete protection. The result is a reliable, set-it-and-forget-it solution that protects your investment, saves fuel costs, and demonstrates responsible environmental stewardship every time you're on the water.