Bilge-B-Dry Electric Bilge Pumps
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
Bilge-B-Dry Electric Bilge Pumps: Smart Technology Meets Total Bilge Control
When it comes to keeping a boat's bilge truly dry, conventional electric bilge pumps have a well-known limitation: their size and placement prevent them from removing the last few inches of standing water that pool at the lowest points of the hull. Bilge-B-Dry was engineered specifically to solve that problem, and their electric bilge pumps represent a new category of marine bilge management — the smart dry bilge system.
The World's Only Smart Device-Enabled Dry Bilge System
What separates Bilge-B-Dry from every other pump on the market is its full smart device integration. Claimed to be the world's only Smart Device-enabled Dry Bilge System, Bilge-B-Dry connects to a free mobile app available on both Apple and Android platforms. From your phone, you can schedule pump cycles, trigger manual timed runs for up to 20 minutes, or set up to five customizable run times per day — all without being physically near the boat. For boaters who leave their vessel at the marina for extended periods, this level of remote bilge management is genuinely unprecedented.
Diaphragm Pump Design Built for Real-World Conditions
Bilge-B-Dry systems use a diaphragm pump design rather than the traditional centrifugal impeller found in most electric bilge pumps. This matters in practice: the diaphragm pump can run dry for extended periods of time without damage — a critical advantage given that bilge water levels fluctuate constantly. The pumps are available in four configurations in both 12VDC and 24VDC to suit a wide range of vessels, and each unit features a compact, heavy-duty enclosure that can be installed in tight or awkward spaces in any orientation — horizontal or vertical.
Low-Profile Bilge Water Pickups with Integrated Filtration
Every Bilge-B-Dry system includes proprietary low-profile bilge water pickups with an integrated, replaceable filter. The pickup design features twenty small holes along the bottom as a debris barrier, and the filter's proprietary blend of materials helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum — eliminating the need for a secondary inline filter that other dry bilge systems require. Pickups can be placed wherever water accumulates, including the deepest bilge sump, A/C evaporator basins, or hard-to-reach compartments throughout the hull.
Flexibility for Any Boat, Any Bilge Layout
Bilge-B-Dry offers four pump configurations — Single, Dual, Triple, and Quad — so boaters can scale the system to their vessel's complexity. Whether dealing with a single bilge compartment on a small powerboat or multiple sumps on a larger cruiser, there is a Bilge-B-Dry configuration suited to the task. Each system includes a quick-disconnect wiring harness with optional connection to a helm switch or wired water sensor, and the units meet ISO 8846 standards, Section 5, for protection against ignition of surrounding flammable gases — an important marine safety certification. For boaters who prefer not to use the app, the system is pre-configured to automatically cycle on a timed schedule as a fallback.
If you are tired of pulling the hatch only to find a puddle of stagnant water causing odors, mold, and corrosion, Bilge-B-Dry's approach to electric bilge pumping is worth a close look. Browse the full Bilge-B-Dry brand lineup or explore all electric bilge pumps to compare your options.